If you need more information,please contact us
Spec Sheet
WL2-H7ACL-P35/ WL2-H7AC-P70에는 고해상도 전용렌즈를 기본으로 장착하여 먼지나 스패터 등으로부터 오염 가능성을 최소화하였으며, 공랭식 하우징을 채용하여 용접열로부터 카메라를 보호 할 뿐만 아니라, WL2-H7ACL-P35에는 전면에 4개의 고휘도 LED조명을 장착하여 어두운 환경에서도 용접토치의 위치 맞춤이 용이하며, 용접 아크와 용융 풀 및 절단작업의 영상을 선명하게 모니터 할 수 있도록 메뉴의 파라메터를 설정하여 저장/사용할 수 있습니다.
적용 용접 프로세스
ㆍ GTAW/TIG (Gas Tungsten Arc Welding/Tungsten Inert Gas Welding)
ㆍ FCAW (Flux-Cored Arc Welding)
ㆍ GMAW/MIG (Gas Metal Arc Welding/Metal Inert Gas Welding)
ㆍ PAW (Plasma Arc Welding)
ㆍ LBW (Laser Beam Welding)
ㆍ 플라즈마/레이저 절단
제품특징
ㆍ140dB+ 의 광대역 Dynamic Range 영상으로 다양한 용접/절단에서 선명한 영상 획득
ㆍ1280x720/50fps(60fps)의 HD 비디오 출력
ㆍProgressive Scan으로 주사선 떨림에 의한 어른거림 제거
ㆍHD-SDI 방식의 Digital 전송으로 용접 전류 노이즈에 의한 화질 열화 전혀 없음
ㆍ상시 온도제어에 의해 외부온도 변화(20~50℃)를 극복한 영상품질 유지
ㆍTIG/FCAW/Plasma/Laser용접 Process에 대해 모니터링 영상품질 탁월.
ㆍ용접Process에 대한 카메라의 최적 설정을 저장
ㆍ’+’형 가이드 커서 표출 가능(대/중/소)
ㆍ4개의 고휘도 LED조명 내장(WL2-H7ACL-P35)
ㆍ압축공기에 의한 공랭식 하우징으로 파이프 내관 용접에 적용 가능
ㆍ경량/컴팩트한 사이즈
ㆍ옵션 상면 마운트 패드를 통해 장착 가능
The WL2-H7ACL-P35/WL2-H7AC-P70 is equipped with a high-resolution Dedicated lens that minimizes the possibility of contamination from dust and spatter and sets/saves the menu parameters to monitor the welding images clearly.
WL2-H7ACL-P35/ WL2-H7AC-P70 is equipped with high-resolution Dedicated lenses to minimize the possibility of contamination from dust or spatter, and the air-cooled housing protects the camera from welding heat.
The WL2-H7ACL-P35 is equipped with four high-light LED lights at the front to facilitate positioning of the welding torch in dark environments, and the menu parameters can be set up and stored to enable clear monitoring of the images of the welding arc, melting pool and cutting operations.
Available Welding process
ㆍGTAW/TIG (Gas Tungsten Arc Welding/Tungsten Inert Gas Welding)
ㆍFCAW (Flux-Cored Arc Welding)
ㆍGMAW/MIG (Gas Metal Arc Welding/Metal Inert Gas Welding)
ㆍPAW (Plasma Arc Welding)
ㆍLBW (Laser Beam Welding)
ㆍPlasma / laser cutting
Features
ㆍ High dynamic range image of 140dB+ to obtain a clear image from various welding and cutting process.
ㆍ 1280x720 / 50fps (60fps) HD video output
ㆍ Progressive scan eliminates the flickering by scanning lines
ㆍ No image deterioration due to welding current noise thanks to digital transmission of HD-SDI system
ㆍ Constant image quality over the recommended temperature range (20 ~ 50 ℃) by the temperature control
ㆍ Superior monitoring image quality for TIG / FCAW / Plasma / Laser welding process.
ㆍ Saves the optimal setting of camera for welding process
ㆍ '+' type guide cursor can be displayed (large / medium / small)
ㆍ Built-in 4 high-brightness front LED lights (WL2-H7ACL-P35)
ㆍ Air-cooled housing by compressed air can be applied to pipe inner-welding
ㆍ Lightweight / Compact size
ㆍ Optional Mount pads can be attached on the upper surface.